medi m.4s PCL dynamic- right & left

• By actively exerting a force via the PCL protection pad the tibia is holding in the desired position
• Safe collateral stabilisation by rigid frame
• Extension and flexion limitation protects against damaging joint movements and relieves injured structures
• Optimal imitation of knee movement by using patented physioglide Hinge Technology
• Contains Rigid Material
• Limitations:
• - Extension limitation: 0°, 10°, 20°, 30°, 45°
• - Flexion limitation: 0°, 10°, 20°, 30°, 45°, 60°, 75°, 90°
• - Immobilisation: 0°, 10°, 20°, 30°, 45°

Open all straps and pull them through the belt eyes. In order to prevent the the Velcro® from causing damage to clothing, for example, fold the end of the strap back on to it.
Pull the knob out of the tibia support. A click confirms the correct position. Pull the tibia support out towards the back until it stops. Bend your leg to ~70° and put the that you have put the brace on properly. The brace has been put on properly if the joint centres are located at the top edge of the kneecap and they are positioned slightly behind the side central line of the leg. Now fasten Belt No. 3 for the thigh and pull it tight. Make sure that you don’t position the brace too far forwards.
Turn the knob back in to activate the turning mechanism. Another click will confirm the correct position. Now turn the wheel to the extent that the tuberosity of the tibia (protruding bone at the top end of the shin) is level with the one on the healthy leg.
When required and for purely stabilising purposes, please fasten the tibia belt. This must always be the last belt to be fastened.
Now move the knee lightly a few times and check again that your have put the brace on properly. Make any necessary corrections.
The indicators on the side on the guide bars may be used as a reference point for the position of the tibia support.